Skip to content

崔济东的博客 - www.jdcui.com

实干、实践、积累、思考、创新！ Tag: 结构工程博士 结构工程师 程序员 结构抗震设计 振动控制 光伏支架 加固改造 软件研发 编程 弹塑性 有限元 超高层 超限设计

Menu
  • [最新]
  • [地震工程]
    • SPECTR: A program for Response Spectra Analysis [SPECTR地震波反应谱计算程序 v1.0]
    • SPECTR_PRO: Response Spectra Analysis Program [地震波反应谱计算程序 专业版]
    • IRSA 2022: Inelastic Response Spectra Analysis Program (弹塑性反应谱及单自由度非线性地震分析工具)
    • GMP v2024: A tool for Calculating Ground Motion Parameters for Seismic Analysis of Structures [结构抗震分析地震动强度指标/地震动参数计算工具]
    • SDOF_Frequency: Dynamic response analysis of SDOF system using frequency domain analysis method [单自由度体系动力响应的频域分析工具]
    • GmsMatch: Response spectrum matching of ground motions [基于目标谱匹配的地震波修正程序]
    • NFAGM: Near‐Field Artificial Ground Motions Generation Program [近场脉冲型地震动人工合成程序]
    • AEEG: A Program for Artificial Earthquake Accelerograms Generation [人工地震波合成软件]
    • DCF_SPECT: A Tool for Calculating Damping Correction Factor of Earthquake Spectrum [地震反应谱阻尼修正系数计算工具]
    • NSDOF v2022: A Tool for Nonlinear Dynamic Analysis of SDOF System [NSDOF单自由度系统动力非线性分析工具 v2022]
    • NMDOF v2022: A Tool for Nonlinear Dynamic Time History Analysis of Shear-Type MDOF System [多自由度剪切层模型系统动力非线性时程分析工具 v2022]
    • GB-SPECT V2021: 中国规范反应谱生成程序 [Chinese Code’s Design Response Spectrum]
    • GD_SPECTRUM: 广东省标准《高层建筑混凝土结构设计规范》(GD DBJ 15-92-2020) 反应谱计算工具
    • RSF Response Spectrum Fitting v2022 [反应谱拟合及反应谱特征参数提取工具]
    • EPA Scaling: EPA-based Adjustment Tool of Seismic Ground Motion Record[基于EPA的地震动记录调整工具]
    • SDOF_FRE: Dynamic Response Analysis of SDOF System using Frequency Domain Analysis Method [单自由度体系动力响应的频域分析工具]
    • FPSA: Fourier and Power Spectra Analysis [地震波频谱分析工具]
    • MSMDOF: A Tool for Mode Superposition Time History Analysis of Shear-Type MDOF System [RSMDOF: 多自由度剪切层模型模态时程分析工具]
    • NGA Converter: PEER NGA Ground Motion Convertor [PEER地震波数据格式转换器]
    • EarthquakeRotation: A Program for Earthquake Acceleration Rotation [地震加速度时程旋转工具]
    • PPPSP V2020: Pushover Performance Point Solution Program [Pushover 分析性能点求解程序][Based on FEMA 440]
    • KNETConvert: Kik-net Ground Motion Converter [K-Net, Kik-net 地震波数据转换工具]
    • Spectr_Evolution: Seismic response spectrum evolution [地震波反应谱演化][反应谱随积分时间长短的变化]
    • SGMPZM: Seismic Ground Motion Parameter Calculator of Chinese Zonation Map [《GB18306-2015 地震动参数区划图》地震动参数计算软件]
    • RDCC v2020: Rayleigh Damping Coefficients Calculator [瑞利阻尼计算器]
  • [选波]
    • [Earthquake Ground Motion Selection Service] 强震记录选取(选波)服务
    • Examples of GMS System[GMS选波系统案例汇总]
    • GMS: Ground Motion Selection System [强震记录选取系统]
    • GML: Ground Motion Library Management System [强震记录管理系统]
    • GMS_RESEARCH: Ground Motion Selection Program for Research [基于目标谱匹配法地震波选波工具 科研版]
    • GMS_DESIGN: Ground Motion Selection Program for Practicing Engineers [基于目标谱匹配法的地震波选波工具 工程师版]
    • GmsMatch: Response spectrum matching of ground motions [基于目标谱匹配的地震波修正程序]
    • AEEG: A Program for Artificial Earthquake Accelerograms Generation [人工地震波合成软件]
    • NFAGM: Near‐Field Artificial Ground Motions Generation Program [近场脉冲型地震动人工合成程序]
  • [自编程序]
    • Softwares Box [自编软件]
    • Softwares Box (New)[自编软件汇总](新)
    • My Programs for Civil Engineering Tests/Experiments [自编的土木工程试验程序集]
    • ENGT: Engineering Tookit [建筑结构辅助设计工具集成系统]
    • ETTK: ETABS Engineering Toolkit (ETTK: 结构设计辅助工具集成系统 ETABS版 )
    • SDOS: Structural Design Optimization System [结构设计优化系统]
    • ColPosOpt: Column Position Optimization under Complex facade ( ColPosOpt: 复杂外立面下外框柱布置优化工具 )
    • OSA: Octave Spectra Analysis Program [倍频程谱分析软件]
    • Midas2Abaqus: Midas2Abaqus 模型转换工具
    • P3D-POST: PEROFRM-3D Post [PERFORM-3D 后处理系统]
    • OSFSV v2021: OpenSees Fiber Section Viewer [OpenSees纤维截面可视化工具]
    • CAD2XTRACT: XTRACT截面转换插件 [AutoCAD转任意截面到XTRACT]
    • YTP: A Pre Process Program for PERFORM-3D [YTP PERFORM-3D前处理软件]
    • ECM: ETABS Concrete Modifier[ETABS混凝土材料修改器]
    • MPHI: Moment Curvature Analysis [弯矩曲率分析软件]
    • YJK Multi-Model Compare: 基于盈建科的多模型参数优化比选工具 (超限助手)(方案优化比选)
    • BeamEvelopes: 连续梁包络分析工具（Continuous Beam Envelope Analysis Program）
    • GB_Concrete: 中国规范混凝土骨架曲线生成工具 [Chinese Code’s Concrete Backbone Curve]
    • BoltShear: Shear Bearing of Pin Bolted Members [栓钉抗剪连接件抗剪承载力计算工具]
    • BeamRebarNum: RC梁纵向钢筋单排最大根数[Maximum Number of Beam Longitudinal Reinforcing Bars]
    • BeamWebRebarNum: RC梁的构造腰筋计算工具 [Calculation tool of waist reinforcement for RC beam]
    • 2ftkTension: 中震墙肢拉应力(2ftk)验算——附加钢骨含钢率计算工具
    • PELL: 隔墙线荷载/面荷载计算工具 (Partitions Equivalent Line Load)
    • SGMPZM: Seismic Ground Motion Parameter Calculator of Chinese Zonation Map [《GB18306-2015 地震动参数区划图》地震动参数计算软件]
    • OSMatTest: OpenSees Material Test [OpenSees单轴材料测试工具]
    • BWTest: Bouc-Wen模型参数测试分析 [Bouc-Wen Hysteretic Model Parameters Analysis]
    • YJK_ModePost: 盈建科模态数据分析工具
    • SDOF_Frequency: Dynamic response analysis of SDOF system using frequency domain analysis method [单自由度体系动力响应的频域分析工具]
  • [软件笔记]
    • Softwares Notes [软件笔记汇总]
    • YJK盈建科 软件笔记
    • Abaqus 软件笔记
    • ANSYS 软件笔记
    • PERFORM-3D 软件笔记
    • ETABS & SAP2000 软件笔记
    • Rhino, Grasshopper 软件笔记
    • SAUSAGE 软件笔记
    • XTRACT 软件笔记
    • OpenSees 软件笔记
    • Midas 软件笔记
    • AutoCAD 学习笔记
    • MATLAB 软件笔记
    • Revit 软件笔记
    • HyperMesh 软件笔记
  • [出版物]
    • 论文汇总
    • Ph.d. Paper [博士论文]
    • [Book][书] Grasshopper 建筑结构参数化建模应用实例 (Application Example of Grasshopper Building Structure Parameterized Modeling)
    • [Book][书] 结构地震动力响应 Python编程 (Seismic Dynamic Response of Structures: Python Programming)
    • [Book][书] 有限单元法 Python编程 (The Finite Element Method: Python Programming)
    • [Book][书] 结构地震反应分析 编程与软件应用 (Structural Seismic Response Analysis Programming and Application))
    • [Book][书] 有限单元法：编程与软件应用 (The Finite Element Method: Programming and Application)
    • [Book][书] PERFORM-3D原理与实例 (PERFORM-3D Theory and Tutorials)
  • [工程]
  • [编程]
    • Softwares Box [自编软件]
    • Softwares Box [自编软件汇总][新]
    • Programming Training [编程训练]
    • Finite Element Method Programming [有限元 编程]
    • Game Programming [游戏编程]
    • Web Programming [Web开发]
    • .NET Programming Notes [.NET编程笔记]
    • Python Programming Notes [Python 编程笔记]
    • MATLAB Programming Notes [MATLAB 编程笔记]
  • [分类]
    • [欧|美标]
    • Detail Drawing [手绘大样]
    • Earthquake Engineering [地震工程]
    • Structural Engineering [结构工程]
    • Geotechnical Engineering [岩土工程]
    • Structural Optimization [结构优化]
    • Structural Design Code [结构设计规范学习]
    • American and European Building Design Codes [欧/美结构设计规范]
    • Steel Structure [钢结构]
    • Reinforced Concrete [钢筋混凝土]
    • Performance Based Seismic Design [抗震性能设计]
    • Civil Engineering Test [土木工程试验]
    • Earthquake isolation and reduction [隔震减震]
    • Seismic Design [抗震设计]
    • Structural Design [结构设计]
    • Structural Analysis [结构分析]
    • FEM Analysis of Structural Components [构件有限元模拟]
    • Dynamics [动力学]
    • Nonlinear FEM [非线性有限元]
    • Math & Geometry [数学与几何]
    • Algorithm [算法]
    • Reprint [转载]
    • Picture [图]
    • Diary [日记]
    • Painting [绘画]
    • Course [教程]
    • My father’s Calligraphy and Poems [父亲的书法与诗词]
  • [访客]
    • Visitors Map [访问者地图]
    • Guest Book [访客留言]
  • [链接]
    • Earthquake Engineering [地震工程]
    • Vibration Control [振动控制]
    • CAD CAM CAE CM CG [计算机辅助设计, 计算力学, 计算几何]
    • Artificial Intelligence [人工智能]
    • Programming [编程]
    • Researcher [研究员]
    • STEAM & MAKER [创客教育]
    • New Energy & Energy Storage [新能源&储能]
  • [博主]
  • [团队]
  • [关于]
    • 研究团队
    • 崔济东博士
    • 常磊博士
    • 合作&联系
    • 建站捐助
    • 知识星球

Tag: 花

Painting [绘画]

绘画[15]-花[Flower]

漂亮的一朵花[Flower]，感觉画得不错。

About Me [关于博主]

Subscription [订阅号]

WeChat 微信订阅号

New Books [新书出版]

Vistor Map [访问者地图]

Search [搜索]

Tag Cloud [标签云]

Abaqus DataSmoothing ETABS FEM GMS HLA MATLAB midas Midas2Abaqus Midas Gen PERFORM-3D SAP2000 Tool YJK YPD 书 动力学 反应谱 地震动 地震工程 地震波 工具 弹塑性 抗规 抗震设计 数学 有限元 混凝土 滞回曲线 滞回环 盈建科 科研 结构分析 结构动力学 结构设计 编程 规范 论文 试验 试验数据 超高层 软件 选波 钢结构 高规

Categories [分类]

  • Abaqus (95)
  • Algorithm [算法] (42)
  • American and European Codes [美欧规范] (7)
  • ANSYS (7)
  • AutoCAD (17)
  • Bridge Engineering [桥梁工程] (3)
  • Civil Engineering Test [土木工程试验] (89)
  • Computer Technology [电脑技术] (28)
  • CSI OAPI Programming [CSI OAPI二次开发] (8)
  • Diary [日记] (92)
  • Dynamics [动力学] (177)
  • Earthquake Engineering [地震工程] (272)
  • Earthquake isolation and reduction [隔震减震] (42)
  • ETABS & SAP2000 (59)
  • FEM Analysis of Structural Components [构件有限元模拟] (52)
  • Finite Element Method [有限元法] (140)
  • Game Programming [游戏编程] (6)
  • Geotechnical Engineering [岩土工程] (9)
  • Ground Motion Selection [选波] (30)
  • Hand Drawn Detail [手绘大样] (22)
  • Information [资讯] (1)
  • Math & Geometry [数学与几何] (56)
  • MATLAB (22)
  • Mechanics [力学] (22)
  • Midas (71)
  • My father's Calligraphy and Poems [父亲的书法与诗词] (28)
  • My Software [我的软件] (387)
  • Nonlinear FEM [非线性有限元] (37)
  • OpenSees (16)
  • Painting [绘画] (24)
  • Paper [论文] (16)
  • Parametrization Design [参数化设计] (6)
  • PERFORM-3D (57)
  • Performance Based Seismic Design [抗震性能设计] (48)
  • Picture [图] (12)
  • PKPM & YJK (104)
  • Programming [编程] (450)
  • Python (9)
  • Reinforced Concrete [钢筋混凝土] (171)
  • Reprint [转载] (5)
  • Research [科研] (160)
  • Rhino, Grasshopper [犀牛,蚱蜢] (7)
  • SAUSAGE (10)
  • Seismic Design [抗震设计] (13)
  • Soil & Foundation [土与基础] (4)
  • Solid Mechanics [固体力学] (19)
  • Steel Structure [钢结构] (66)
  • Structural Analysis [结构分析] (485)
  • Structural Design [结构设计] (506)
  • Structural Design Code [结构设计规范] (120)
  • Structural Engineering [结构工程] (681)
  • Structural Optimization [结构优化] (25)
  • Structural Wind Engineering [结构风工程] (9)
  • Uncategorized (2)
  • Vibration Control [振动控制] (28)
  • Video [视频] (8)
  • Web Programming [网络开发] (4)
  • Working Drawings [施工图] (11)
  • 随笔 (34)

Recent Posts [近期文章]

  • [建站] jdcui.com启用新的网站访客统计地图
  • [结构设计] 采用ABAQUS进行转换层实体有限元分析流程分享
  • [预告] 新书《结构地震动力响应 Python编程》即将出版！！[Seismic Dynamic Response of Structures —— Python Programming]
  • [软件][动力学][Dynamics] NSDOF算例7——设置狗骨式滞回摩擦阻尼器单自由度体系动力时程分析 [Dynamic time history analysis of a single degree of freedom system with dog bone type hysteretic friction damper]
  • [案例][软件][更新] BBCA案例: “分级屈服形”滞回曲线骨架曲线提取案例 (BBCA v2024)
  • [振动控制] 刚度、质量、阻尼对振动舒适度的影响总结 (Summary of the influence of stiffness, mass, and damping on vibration comfort)
  • [软件][地震动] AEEG人工地震波合成 —— 案例4 (某核电站人工波生成)
  • [预告] 《Grasshopper 建筑结构参数化建模应用实例》即将出版！！[Grasshopper Building Structure Parameterized Modeling Application Example]
  • [软件][更新] DataSmoothing 曲线平滑修正软件 案例19: 应力-应变曲线平滑 [Datasmoothing curve smoothing correction software Case 19: Smooth stress-strain curve]
  • [软件][更新] SPECTR_PRO 地震波反应谱计算程序功能更新 ——多组波反应谱曲线对比

Recent Comments [最新评论]

  • Ali on [编程][软件][结构设计] 风荷载调整工具 (Tool for windload Modification)
  • K on [振动控制][软件] VCAP: Vibration Comfort Assessment Program [振动舒适度评估软件]
  • iconcrete on Mander Confined Concrete Model 资料整理
  • 范阳 on Modified Kent & Park Concrete Model 资料整理
  • 王先生 on [下载][编程][结构][设计] PELL: 隔墙线荷载/面荷载计算工具 (Partitions Equivalent Line Load)
  • 王先生 on [编程][软件][下载][超限] 2ftkTension: 中震墙肢拉应力(2ftk)验算——附加钢骨含钢率计算工具
  • CJD on [结构分析][Abaqus] Pushover Analysis by Abaqus [Abaqus Pushover 分析]
  • 涂政堂 on [结构分析][Abaqus] Pushover Analysis by Abaqus [Abaqus Pushover 分析]
  • xuliang on Modified Kent & Park Concrete Model 资料整理
  • Felix on [下载][软件][动力学]RDCC: Rayleigh Damping Coefficients Calculator [瑞利阻尼系数计算器]

FRIENDS [友情链接]

  • [01] 陈学伟博士的博客 [弹塑性分析&性能设计]
  • [02] 结构工程师林超伟的博客
  • [03] 徐珂的建筑结构博客 [建筑结构设计]
  • [04] 清溪长河 [桥梁工程]
  • [05] 李华伟的博客 [ ABAQUS ]
  • [06] 鲁班人的博客 [钢结构,ANSYS ]
  • [07] 补国斌博士 [ 结构抗震 ]
  • [08] 昆神的结构博客 [结构设计]
  • [09] 崔家春的博客 [专注结构分析]
  • [10] 结构软件学且思 [种菜盖房子研习中医]
  • [11] 卫杰彬的结构博客 [结构与地震工程]
  • [12] 曾明的结构博客 [结构分析与设计]
  • [13] 林煌斌博士的博客 [结构工程]
  • [14] Aaron Yu的知乎 [结构风工程]
  • [15] 陈维晃的博客 [OpenSees, OSLite, 三本, 非洲务工]
  • [16] 贾苏的博客 [结构分析, SAUSAGE]
  • [17] 石岩博士研究小组 [桥梁工程与地震模拟]
  • [18] 徐若天的博客 [结构舒适度][VSET软件]
  • [19] 田草博客 [著梦CAD, ByCAD]
  • [20] 李燕良的博客 [MIDAS软件开发]
  • [21] 张瑞甫课题组 [结构振动控制与地震动]
  • [22] 陈永祁的博客 [北京奇太振控科技发展有限公司 Taylor阻尼器]
  • [23] 瞿立建的物理学博客 Joyful Physics [高分子物理博士,物理学教学/科研]
  • [24] 曲哲的个人主页 [结构工程/地震工程研究]
  • [25] 陆新征的个人主页 [结构工程/地震工程研究]
  • [26] 陈睦锋博士的博客 [建源学堂]
  • [27] Professor Terje Haukaas [UBC]
  • [28] 水哥ANSYS结构院 [ANSYS软件研究]
  • [29] 任晓丹的个人主页 [损伤力学，计算力学]
  • [30] 文志彬 BIMandStructure
  • [31] 孔庆钊教授课题组 [数字孪生/人工智能/硬件装备/扩展现实]
  • [32] 陈庆军教授 [土木工程与计算机应用]
  • [33] 冀昆博士的个人网站 [地震工程]

Archives [存档]

COMPANIES [企业链接]

  • [01] 广州容柏生建筑结构设计事务所 [RBS Architectural Engineering Design Associates]
  • [02] 北京建解建筑设计咨询有限公司 [asworkshop]
  • [03] 扬州振中测试技术有限公司 [测试技术, 测试设备]
  • [04] 字屿画工程设计咨询有限公司
  • [05] 北京筑信达工程咨询有限公司
  • [06] 中国电建集团华东勘测设计研究院有限公司
  • [07] Kinex 坚宜佳 [智能家居 建筑五金]
  • [08] 北京建智达工程管理股份有限公司
  • [09] 中国能源建设集团广东省电力设计研究院有限公司
  • [10] 众图科技
  • [11] 云庐科技
  • [12] 科大讯飞
  • [13] TEXAS INSTRUMENTS [德州仪器]
  • [14] 深圳市力鹏建筑结构设计事务所（普通合伙）
  • [15] 深圳千典建筑结构设计事务所有限公司
  • [16] SAUSG [广州建研数力建筑科技有限公司]
  • [17] 广东巨泰钢结构工程有限公司
  • [18] CAPOL华阳国际
  • [19] 同磊 [3D3S,健康监测,设计咨询,张拉工程]
  • [20] 中建国际建设有限公司
  • [21] 飞图结构
  • [22] 神州数码集团股份有限公司
  • [23] 广州珠江外资建筑设计院有限公司 珠江设计
  • [23] 铁木辛柯（TongMSK DESIGN）

LINKS [链接]

  • [01] Berkeley Seismo Blog [伯克利地震博客]
  • [02] OpenSees [Open System for Earthquake Engineering Simulation]
  • [03] PEER Ground Motion Database [PEER强震数据库]
  • [04] Strong-motion Seismograph Networks (K-NET,KiK-net) [日本K-NET,KiK-net强震数据库]
  • [05] WELSIM [有限元仿真软件]
  • [06] CSI Knowledge Base [CSI软件知识库]
  • [07] ECSpace优路普 [欧美标学习空间]
  • [08] 工标网 [查标准上工标网]
  • [09] 南京库伦 [SOFiSTiK, BIM]
  • [10] 迈达斯学堂论坛 [midas university]
  • [11] 爱上土木 [工程资料]
  • [12] 中华钢结构论坛 [okok.org]
  • [13] 犀牛建筑网[Rhino曲面建筑和Grasshopper参数化]
  • [14] Grasshopper (Algorithmic Modeling for Rhino)
  • [15] GUROBI中国 [math programming solvers]
  • [16] Gurobi Optimization
  • [17] Google OR-Tools
  • [18] lpsolve [Mixed Integer Linear Programming (MILP) solver]
  • [19] NLopt [Nonlinear Optimization]
  • [20] Node.js 中文网 [JavaScript engine]
  • [21] pandas [python data analysis]
  • [22] Arduino [open-source electronics platform]
  • [23] Arduino中文社区
  • [24] 1stOpt – First Optimization
  • [25] 建标库 [建筑工程资源,规范,图纸]
  • [26] Rhino.Python Guides
  • [27] Grasshopper SDK
  • [28] 东岳流体 CFD
  • [29] OpenSees
  • [30] OpenSeesPy
  • [31] OpenSeesWiki
  • [32] Structurefit – Digital Structures
  • [33] eQUILIBRIUM
  • [34] Thrust Network Analysis
  • [35] Cadenary string modeller
  • [36] Active Statics
  • [36] The Block Research Group (BRG)
  • [37] Polyhedral Structures Lab (PSL)
  • [38] PNG Compressor
  • [39] LibreCAD
  • [40] CFD Julia
  • [41] Free Spire.Doc for .NET
  • [42] wxWidgets: Cross-Platform GUI Library
  • [43] GIF Compressor
  • [44] FreeCAD
  • [45] pngquant [lossy PNG compressor]
  • [46] Jupyter
  • [47] MP4COMPRESS
  • [48] 天加建筑
  • [49] ViewWave
  • [50] MatDEM [基于GPU的土体离散元软件]
  • [51] Microsoft Windows下载
  • [52] 亦是美网络
  • [53] SCCT结构构件计算工具箱
  • [54] EasyBIM
  • [55] Architectural Technology Laboratorial enture
  • [56] 盈建科 / PyYJKS
  • [57] 燎结构
  • [58] 拖拽科技 [工程计算,拖拽编程]
  • [59] 熊猫学术搜索
  • [60] Lightly [Python IDE]
  • [61] OpenFOAM and The OpenFOAM Foundation
  • [62] FreeFEM [partial differential equation solver for non-linear multi-physics systems]
  • [63] ALGLIB [a cross-platform numerical analysis and data processing library]
  • [64] Google Translate
  • [65] 蓝奏 云存储
  • [66] Eigen [C++ template library for linear algebra]
  • [67] Data-Convert
  • [68] SEISMOGRAPH [earthquake engineering software]
  • [69] 百度翻译
  • [70] 小鹅通 [知识产品与用户服务]
  • [71] OpenSees UniaxialMaterial Command
  • [72] Next.js [轻量级的 React 服务端渲染应用框架]
  • [73] Vue.js [渐进式 JavaScript 框架]
  • [74] 慕课网 [程序员的梦工厂]
  • [75] 学府图书馆
  • [76] 马同学 [数学]
  • [77] 建筑云联盟
  • [78] DataFountain
  • [79] 在线工具
  • [80] 博风软件工作室 [SCCT结构构件计算]
  • [81] MasterGo[产品设计]
  • [82] 交易师_科学的投资方式
  • [83] 通信达软件
  • [84] 语雀 [构建数字花园]
  • [85] PubScholar 公益学术平台
  • [86] 知犀思维导图
  • [87] ProQuest | 更好的研究 学习 见解
[an error occurred while processing the directive]

Recent Posts [近期文章]

  • [建站] jdcui.com启用新的网站访客统计地图 2024-11-19
  • [结构设计] 采用ABAQUS进行转换层实体有限元分析流程分享 2024-11-10
  • [预告] 新书《结构地震动力响应 Python编程》即将出版！！[Seismic Dynamic Response of Structures —— Python Programming] 2024-11-07
  • [软件][动力学][Dynamics] NSDOF算例7——设置狗骨式滞回摩擦阻尼器单自由度体系动力时程分析 [Dynamic time history analysis of a single degree of freedom system with dog bone type hysteretic friction damper] 2024-11-04
  • [案例][软件][更新] BBCA案例: “分级屈服形”滞回曲线骨架曲线提取案例 (BBCA v2024) 2024-10-28
  • [振动控制] 刚度、质量、阻尼对振动舒适度的影响总结 (Summary of the influence of stiffness, mass, and damping on vibration comfort) 2024-10-14
  • [软件][地震动] AEEG人工地震波合成 —— 案例4 (某核电站人工波生成) 2024-10-06
  • [预告] 《Grasshopper 建筑结构参数化建模应用实例》即将出版！！[Grasshopper Building Structure Parameterized Modeling Application Example] 2024-09-29
  • [软件][更新] DataSmoothing 曲线平滑修正软件 案例19: 应力-应变曲线平滑 [Datasmoothing curve smoothing correction software Case 19: Smooth stress-strain curve] 2024-09-25
  • [软件][更新] SPECTR_PRO 地震波反应谱计算程序功能更新 ——多组波反应谱曲线对比 2024-09-19

Tags [标签云]

Abaqus DataSmoothing ETABS FEM GMS HLA MATLAB midas Midas2Abaqus Midas Gen PERFORM-3D SAP2000 Tool YJK YPD 书 动力学 反应谱 地震动 地震工程 地震波 工具 弹塑性 抗规 抗震设计 数学 有限元 混凝土 滞回曲线 滞回环 盈建科 科研 结构分析 结构动力学 结构设计 编程 规范 论文 试验 试验数据 超高层 软件 选波 钢结构 高规

LINKS [其他]

  • [01] 广东省土木建筑信息网 0
  • [02] 广东省工程勘察设计行业协会 0
  • [03] 广东省建设工程材料价格监测系统 0
  • [04] 广东省工程造价信息化平台 (广东造价信息网) 0
  • [05] 广州市建筑科学研究院集团有限公司 0
  • [06] 全国标准信息公共服务平台 0

Search [搜索]

WeChat Subscription [微信订阅号]

Log in to WeChat in Discover->Scan QR Code

(扫描以下二维码,关注微信订阅号)

Cookie-free visitor tracker
Copyright © 2024 崔济东的博客 - www.jdcui.com – OnePress theme by FameThemes
粤ICP备2021089646号-1
error: Content is protected !!

[01] Ground Motion Selection (选波) 服务
[02] 著:《PERFORM-3D原理与实例》
[03] 著:《有限单元法-编程与软件应用》
[04] 著:《结构地震反应分析-编程与软件应用》
[05] 著:《有限单元法 Python编程》（New!!!）
[06] Software Notes [软件笔记汇总]
[07] 土木工程试验数据处理软件汇总（New!!!）
[08] 自编程序 [Software Box]（New!!!）
[09] 手绘大样 [Detail Drawing]（New!!!）

打开 Reopen
NEW BOOK 新书

 

打开(Reopen)